APPLICATIONS
INOX-mx11 Chain & Brake Clean readily dissolves brake fluid, oil, grease and grime and can be used as a degreaser for the following.
• Disc Brake assemblies, disc brake pads - before and after disassembly.
• Brake shoes and backing plates, master and slave cyclinders.
• Brake cables, inner control and steering cables.
• Clutch plates and pressure plate assemblies
• Petrol and diesel engines and their component parts.
• Motorbike, bicycle and go-kart chains and sprockets.
• Endless, machinery hoist and vehicle hoist chains.
• Forklift hoist and industrial machinery chains and cables.
• Winch cables and chains
• PTO's, farm and mining machinery chain and sprocket drives.
• All machinery and equipment component parts
MOTORCYCLES: INOX-mx11 Chain & Brake Clean is ideal for cleaning gritty oil and dirt residue off bike chains and sprockets, leaving them clean and dry and ready for lubrication. INOX-mx9 No Chukka Chain Lube with PTFE is recommended for motorbike chains & sprockets.
INOX-mx9 No Chukka Chain Lube with PTFE can be used quite effectively to lubricate most chains and cables, but for heavier applications, INOX-mx8 Spray Grease is more suited for these types of applications.
(INOX-mx8 Spray Grease is a Lithium complex and PTFE based extreme pressure, high temperature grease that is highly resistant to water wash-out, salt and chemicals).
CAUTION: When using INOX-mx11 Chain & Brake Clean avoid direct contact with rubber and perspex and prolonged contact with neoprene and plastics. Use in a well ventilated area.
